Linear drive controller

Linear drive controller. Specification: Supply voltage 19.5 – 24.5VDC, Maximum load current 1.6A, Supported encoder incremental, NPN, A/B, Overload detector setting range 0.2 – 1.6A, End positions programmable

Technical parameters

Supply voltage	19.5 – 24.5VDC
Maximum load current	1.6A
Supported encoder	incremental, NPN, A/B
Overload detector setting range	0.2 – 1.6A
End positions	programmable

Functionality

Control via 2 or 3 inputs supporting a button or relay contact, an additional analog input, actuator position memory after supply voltage loss, programmable electronic end-of-stroke position limiters, soft start, stop and end-position approach functions, motor stall (motion stop) detection, motor current overload detection, actuator travel time monitoring and actuator end-position arrival time monitoring.

Scope of work

Development of the operating concept, schematic design, PCB design, firmware programming, research and testing, preparation of production documentation and the device application manual.

Ask about a similar project →